Leaking and sagging gutters repaired properly
Most gutter faults are joints, brackets or fall, not the whole run. We reseal leaking joints, refix or replace brackets, correct the fall so water runs to the outlet, and swap cracked sections, and we say so when a job is beyond a repair. Repairs are quoted individually.
The usual faults
Dripping joints are the most common, where the seal has dried out between two sections. Sagging runs come from loose or rotted brackets, and standing water comes from a run that has dropped out of fall. A gutter should slope gently, roughly 1 in 350 to 1 in 600, towards the outlet.
On older cast iron, look for rust bloom at the joint bolts and flaking paint on the outside. Those are early warnings, not emergencies, if they are dealt with in time.
What we will and will not fix
We reseal joints, refix brackets, re-set the fall and replace short sections of like-for-like gutter. If the fascia timber behind a bracket has rotted, the bracket will not hold, and that needs a joiner first. We will flag it instead of fixing into wood that will fail again.
Fully replacing the guttering on a house is a bigger quote, and we will tell you if repairs would be false economy.
Older materials
Some mid-century outbuildings and garages have asbestos cement guttering. It is safe if left alone and should not be cut, drilled, scrubbed or broken. If you suspect it, do not disturb it, and get it identified by a licensed specialist.
Common questions
Is a dripping joint worth fixing?
Yes. A slow drip down a wall keeps masonry wet and stains brickwork, and it is usually a quick reseal if caught early.
How much do repairs cost?
Repairs are quoted individually. WhatsApp photos for a free quote.
Can you repair cast iron gutters?
Often yes: resealing joints and refixing brackets are routine. Badly corroded sections may need replacing, and we will tell you which.